Side Turn Signal Lights; Replacing A Rear License Plate Light Bulb - Acura 2010 RDX Owner's Manual

SOCKET
BULB
3. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
5. Press the brake pedal to make
sure the new bulb is working.
6. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
7. Reinstall the high-mount brake
light assembly into the tailgate.
Tighten the two screws and
reinstall the covers.
2010 RDX

Side Turn Signal Lights

Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.
Replacing a Rear License Plate
Light Bulb
The license plate has two lights
above it. The bulbs should be
replaced by your dealer.
Lights
437