Replacing Rear Bulbs (In Tailgate) - Acura 2010 RDX Owner's Manual

3. Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
4. Turn on the lights to make sure
the new bulb is working.
Replacing Rear Bulbs
(in Tailgate)
COVER
NOTCH
1. Open the tailgate. Place a cloth on
the edge of the light assembly
cover to prevent scratches.
Remove the cover by carefully
prying in the notch on its middle
edge with a flat-tip screwdriver.
2. Determine which of the two bulbs
is burned out: taillight or back-up
light.
2010 RDX
BULBS
SOCKETS
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Lights
CONTINUED
433