ZyAura ZG106 Operating Instructions

ZG106 CO
ZG106 is a portable, accurate handheld CO
ambient temperature. It uses Dual Beam NDIR technology to improve the long term stability.

Features:

The built-in Data logger can store 48 sets of CO
□
V
□ V Max/Min mode can record the maximum and minimum concentration of CO
□ V The Alarm mode will sound at 1000 PPM, the ASHRAE limit. The Alarm Level can be modified, and the Alarm sound can be turned off.
□ V The RCFS Mode can recover the original factory settings after the CO
(Display Features and Modes)

MODE FUNCTIONS

There are several Modes which we can adjust the setting parameters. These modes are Alti Mode, Alarm Mode, Outside Mode, Ucal Mode,
Datalogger Mode, MaxMin Mode and rcFS Mode in sequence.
ALTI Compensate the pressure changes with appropriate altitude of location when measure.
Alarm while CO
ALARM
The Alarm sound can be turn on/off while the "speaker Icon" flashes.
OUTSIDE Modify the outside CO
CALI Calibrate the sensor while the reading deviates from the actual CO
DATALOGGER Show the past CO
MaxMin Show the Max and Min CO
rcFS Recover the factory setting, if the device cannot show accurate reading.

OPERATION INSTRUCTIONS

PowerOn
■
Press Power button (○ ) to turn on the device after placing 4 AA batteries into the battery holder or AC adapter plug into the DC socket.
1
Once power on, CO reading will show after 15 seconds of warm up.
2
WarmUp
■
It lasts approximately 1min before WARMUP disappears; all the functions will not response during warm up.
UserMode
■
After warm up, the device will stabilize and display the normal CO
and Temperature Monitor Operating Instructions
2
monitor. In addition to measuring the CO
2
and temperature in the past 24 hours; one log per 30 minutes.
2
1. Power Button 6. LCD Display
2. Enter Button 7. LED Light
3. Down Button 8. Function Label
4. Up Button 9. Gas Entry Hole
5. Mode Button 10. Power inlet
concentration exceed one threshold, which can be modified.
2
concentration, for defining the ventilation rate.
2
and Temperature records in the past 24 hours.
2
reading before being cleared or powered off after PowerOn.
2
concentration, this device can also measure the
2
since the device has been last turned on.
2
device has been recalibrated, altered, or damaged.
2
11. RJ45 socket
12. Housing Stand
13. Battery Cover
14. AA Batteries*4
concentration.
2
Reading (Upper Display) - remain visible at all times.
2