Section 6 − Replacing The Battery; Section 7 − Maintenance - Hobart XFS Series Owner's Manual

Auto-darkening welding helmets
Table of Contents

Advertisement

SECTION 6 − REPLACING THE BATTERY
.
The XFS helmet has a non-replaceable Lithium battery.
2
OPEN
LOCK
NOTICE − Never use solvents or abrasive cleaning detergents.
NOTICE − Do not immerse the lens assembly in water.
The helmet requires little maintenance. However, for best performance clean
after each use. Using a soft cloth dampened with a mild soap and water solution,
wipe the cover lenses clean. Allow to air dry. Occasionally, the filter lens and
sensors should be cleaned by gently wiping with a soft, dry cloth.
OM-221 534 Page 10
1
AAA BATTERY
SECTION 7 − MAINTENANCE
1
XVS Auto-Darkening Lens
2
Battery Cover
Slide cover to left and remove batter-
ies. Install two AAA Alkaline batteries
and replace cover.
.
Be sure the positive (+) side of the
battery is aligned with positive (+)
terminal.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xvs seriesXfs 10Xvs 13Xvs 9

Table of Contents