Toro Z Master Professional 5000 Series Operator's Manual page 67

Figure 101
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides
of the deck as shown in
Figure 102
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
g009038
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
Figure 102.
g010252
8. Raise the deck struts and secure them in the
raised position.
9. Slide the deck out to the right side of the
machine.
67