Toro Z Master Professional 5000 Series Operator's Manual page 42

6. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
48).
7. Start the engine and drive to a flat area.
8. Check the oil level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours—For Kohler
engines—change the engine-oil
filter (more often in dirty or dusty
conditions).
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
Figure 48
Changing
41).
(Figure 49).
(Figure
g194610
Note:
the engine, and then turn the oil filter an extra
3/4 turn.
3. Fill the crankcase with the proper type of new
oil; refer to
42
Figure 49
Ensure that the oil-filter gasket touches
Engine-Oil Specifications (page
g008804
g027477
40).