Yuksel Elektroteknik MINIX HD PUNTO PLUS User Manual page 54

If select USALS in Motor Type.
Local Longitude, Local Latitude: Press
keys to switch between West and East, or press
keys to switch between North and South.
Press OK key to enter into the editing mode. Use
numeric keys (0-9) to input the longitude or
latitude, press MENU key or EXIT key to exit. The
range of the longitude is from 0 to 180,while the range of the latitude is from 0 to 90. If
the inputted value is not in this range, system will pop up a dialogue "Out of Range"
when you exit from this window. You can press OK key to close this dialogue.
Goto,Save: Position: Press OK key to save the message.
2.3 Satellite List
1. Press PR+, PR- keys to select the satellite up or
down. Press OK key to select and mark, and you
can press OK key again to cancel the selection and
the mark.If you press 0 key, you can mark all
satellites, and press 0 key again to cancel the mark.
If you press INFO key,you can enter the Antenna
Setting, and press red colour key to come back
Satellite List.
2. Press red colour key to pop up dialogue " Are you
sure to delete?". Press OK key at the OK button to
delete the selected Satellite, or press EXIT key to
cancel the operation.
3. Press yellow colour key to pop up the Edit
window.
Name: Use PR+, PR- key and
change the name of the satellite, please refer to the
Edit Channel Name.
Longitude: use numeric keys to edit the longitude.
The range of the longitude is from 1to 180 degree. If
beyond this range, system will inform you "out of range".
Direction: press
After setting, press save
without saving.
keys to switch between E and W.
butto n to save and exit, while press EXIT key on the RCU to exit
key to