Yuksel Elektroteknik MINIX HD PUNTO PLUS User Manual page 53

2. Installation
2.1 Antenna Setting
Suppose that you have selected Fixed Antenna.
1. Satellite: All selected satellites in the satellite list
are displayed in this item.
Press keys to select the satellite in circle. Or
press OK key to pop up the drop-down list, then
select the desired satellite in the list and press OK
key to confirm.
2. LNB Freq, TP, DiSEqC1.0, DiSEqC1.1: The same operation as the above.
3. 22K: You can press
4. Start Search: Select among Satellite, Blind and TP.
5. Press red colour
2.2 Motor Setting
1. Satellite: Press
in circle. Or press OK key to pop up the drop-down
list, then select the desired satellite in the list and
press OK key to confirm.
2. TP: The same operation as the above.
3. Motor Type: Select among Off, DiSEqC1.2 and USALS.
If select DiSEqC1.2 in Motor Type.
Fine Drive: Select between Left and Right.
Limit: Press
Limit and West Limit.
Recalculation,Save Position: Press OK key to
save the message.
Goto: Select between Position and Zero.
keys in LNB Frequency list to select.
key to enter Satellite List and press green
keys to select the satellite
keys to switch among Off, East
colour key to enter TP List.