Cleaning And Maintenance - Electrolux EQAXF01BXSI User Manual

Changing bottles
A flashing orange light on your function lights alerts you
when your bottle is empty. Replace the bottle as
soon as possible.
Do not dispense hot, cool or cold water if the orange
light is flashing as you could empty the tanks and
cause the dispenser to overheat.
1. Open the cabinet door.
2. Slide empty bottle out of cabinet.
3. Remove probe assembly from empty bottle.
4. Set empty bottle aside.
5. Place fresh bottle outside of cabinet. Remove entire plastic cap
from top of bottle. Clean outside of new bottle with a cloth.
6. Place probe assembly into bottle. Slide collar with head down
until it clicks in place.
7. Slide bottle into cabinet and close door.

Cleaning and maintenance

1. The unit has been factory disinfected, however,
it is advisable to clean the dispenser prior
to initial use.
2. Follow the step of "using your water dispenser
" on page 7
3. Make sure unplug the water dispenser before
cleaning.
4. Dispense water from each spout till no water
flow out from spout.
5. Place a large bucket beneath the drain hole which
is on the back of water dispenser, then remove the
drain cap and drain out water.
6. Once draining finished, close the drain hole with
drain cap.
7. Follow "using your water dispenser " on page 7
to use the water dispenser normally.
10
Fig.
12
Fig.
13