Electrolux EQAXF01BXSI User Manual page 26

Dispensing cold water
After setup, it will take up to approximate
1 hour get water to maximum cold
temperature. During this time the
compressor could run continuously.
This is normal.
1. Position bottle, glass, pitcher or
cooking pot below spout.
2. Press cold water button
downward to start cold water flow.
3. Release button once desired fill
level is achieved.
Dispensing normal water
1. Position bottle, glass, pitcher or
cooking pot below spout.
2. Press normal water button
downward to start normal water
flow.
3. Release button once desired fill
level is achieved.
Dispensing hot water
After setup, hot water will be available
in 15-20 minutes.
1. Position bottle, glass, pitcher or
cooking pot below spout.
2. Push the red child lock button from
right to left and press hot water button
downward to start hot water flow.
3. Release button once desired fill
level is achieved.
9
Fig.
10
Fig.
11