Pre-Starting Procedure - THOR3D Calibry User Manual

User manual
Pre-starting
procedure
Connect the scanner to a computer with the Calibry Nest
software installed.
•
Strictly follow the connection sequence. Make all connections when
the power supply unit is disconnected. Connect the power supply unit
when all other connections have been made. Otherwise, the equipment
may be damaged, and this case will not be covered under the warranty.
When the scanner is powered on, it turns on automatically.
•
When you first connect the scanner to the computer, we recommend
that you connect the computer to the Internet. In this case, the software
will automatically download the scanner calibration file, and the scanner
will be ready for use. Otherwise, you can manually download the calibra-
tion file. The calibration file can be requested from the supplier of the
scanner.
4