Advertisement
Battens (Studs)
Ensure that
250mm
(10")
of SpeakerLink
Cable is present
page 3
2
Installation - New build
Brace
Rough-in Box is installed by screwing through the side slots
with recommended sized screws into pre-prepared woodwork,
Joists; Battens and Studs.
Woodwork must fit firmly to the side of the Rough-in Box. Such
that once screws are tightened side wall of Rough-in Box is not
distorted.
Initially leave fixing screws loose enough so that Rough-in Box
position can be easily adjusted.
Rough-in Box
Fixing screws (Not supplied)
No8 x 25 (Min) Pan Head
Dimension 'A'
Front edge of Rough-In
Box needs to protrude
beyond joists & battens
by Plaster board (Drywall)
thickness & plaster thickness
Joists
'A'
Self-tapping screw
6 positions
Advertisement
