Using Your Toaster - Sunbeam 3837 User Manual

Before use remove any stickers and wipe the body of your
toaster with a damp cloth.
Ensure that before plugging the toaster into the outlet,
the bread carriage lever is in the uppermost position.
Plug the cord in 120/127 volt, 60 HZ AC outlet. Position
toaster at least 3 inches away from wall or rear of counter.
Let the first toasting process take place without inserting
any bread to preheat the new elements and burn off any
dust, which may have accumulated during storage.
Select the desired level of darkness by turning the "1-5"
light/dark knob on the front panel of the toaster to the
right for darker toast and to the left for lighter toast.
Your selection should vary based on the moisture content,
thickness of bread, whether fresh or frozen and your
darkness preference.
Next, place bread in slot and depress bread carriage lever
downwards until it locks. Carriage lever will not stay down
if toaster is not plugged in. The self-adjusting bread
guides will automatically center the bread for even
browning.
After the desired level of darkness has been reached, the
bread will pop up automatically and is ready for removal
from the slots. The bread carriage will return to its original
position and disconnect the elements, ready for the next
toasting.
To remove toast, press up on the bread carriage lever to
lift toast out of the bread slots.
To remove jammed toast, unplug toaster and remove
bread once toaster has cooled down. Never insert fingers
or metallic utensils into slots.
DO NOT WRAP THE CORD AROUND THE MAIN BODY OF
4
U
SING YOUR
APPLIANCE DURING OR AFTER USE.
T
OASTER