Panasonic AJ-PX230 Series Firmware Update Procedure page 3

7. Wait until the "Version update successful" dialog is displayed. It may take approximately 25 minutes.
8. Remove the SD card.
9. Switch OFF the power, and disconnect and connect DC power > switch ON the power to complete.
10. Make sure the firmware version.
How to check firmware version : Keep press MENU button for 3 seconds > "DIAGNOSTIC" > "VERSION"
Firmware update procedure for AJ-PX230, PX280MC series
Progress bar
When progress
bar reaches the
end
Page3/4
January 2017