Introduction - LC Tools Lucy Clay Machine Instructions For Use Manual

1. Introduction

Thank you for your purchase of the LC Machine from LC Tools.
You have in your hands a high-quality and robust professional tool/product designed
specifically for the processing of polymer clay.
The quality of the device was controlled during the production process and an end-line and
final inspection was conducted to guarantee its functionality.
Your satisfaction is our main aim.
These instructions for use contain the device's specifications, installation and transport
guidelines and instructions and information on setting the device up and putting it to use.
This manual would not serve its purpose if the department heads, operators and maintenance
personnel were not familiar with its contents.
The user and operator shall familiarize themselves with this manual prior to use. It contains
important occupational safety and maintenance guidelines and should be considered
as part of the device. Error-free and safe operation of the device and the length of its useful
life are largely dependent on proper and careful maintenance.
The operating personnel should fully understand and be familiar with the information
contained in all the sections of this manual. Of special importance are the safety precautions
included in each chapter. Also included are general precautions for operating this device.
If you are not quite clear about some information contained in this manual, please contact the
manufacturer. We recommend that you make a copy of the 'Instructions for use' document
once you have filled in the information on your purchase and store the original carefully
so that you can retrieve it if the copy is lost or damaged. When working, follow the safety
instructions to prevent any risk of injury to yourself or to other persons who may be present.
These instructions are marked with the following warning symbols throughout the manual:
• CAUTION – HEALTH HAZARD OR RISK OF PROPERTY DAMAGE
• CRUCIAL INFORMATION FOR THE OPERATING PERSONNEL
• GENERAL INFORMATION FOR THE OPERATING PERSONNEL
5