OWI 2X2IC6NA User Manual page 7

Connect the speaker wires to the speaker terminals. Connect one end of the red speaker cable to the red (+) terminal
and the end of the black (-) speaker cable to the black terminal of the speaker. Make sure that none of the strands
from the black and red wires are touching each other to prevent damage to your speaker and amplifier due to short
circuit.
Place the 2X2IC6NA into the opening securing it firmly on the 2X2 frame.
Proper Wire Gauge Selection
The gauge of wire required is determined by the distance between your amplifier/receiver and the speakers. Use the
following chart as a guide:
Length
Less than 10 feet
10 to 100 feet
Over 100 feet
OWI User's Manual: Model: 2X2IC6NA
Minimum Gauge
18 - 20 Gauge
16 to 18 Gauge
14 Gauge
Page 7 of 9
Filename: 2X2IC6NA MANUAL
11/10/14