Snmp; Firmware Upgrades; Password Recovery - Dataprobe iBootBar iBP-N15 Installation And Operations

iBootBar – Precision Version
set user <name> email <email address 64 char max>
set user <name> sendmail <yes/no>

SNMP

Up to four SNMP managers can be set. Each manager will receive Trap notifications for outlet changes, autoping
and current alarms. Set the SNMP manager IP addresses using the
command. Enable or Disable SNMP for any manager with the

Firmware Upgrades

The iBootBar can be upgraded via the network if the upload feature has been enabled using the
command on the console interface. To upgrade the iBootBar download the latest version of the firmware and
upgrade utility from the Dataprobe website.

Password Recovery

Holding the reset button on the front panel of the iBootBar for 5 seconds or longer will initiate a password recovery
mode. Once the reset button is released, the user has 30 seconds to log in to the CLI using the username
and password . Upon accessing the CLI, change the username and password for User 1 as desired.
admin
Other Utilities
Copies of this manual, firmware upgrade files and other resources are available on the Dataprobe website.
Please visit http://Dataprobe.com/support_ibootbar.html
iBootBar_Precision_20160428e.doc
set snmp <n> enable <yes/no>
http://Dataprobe.com/ibootbartools.html
for further information.
set snmp <n> ipaddress <dotted decimal>
command.
Page 16
set upload enable yes
admin
Firmware ver 1.41.32