5. INSTALLATION OF THE MACHINE
5.1 Preparation
5.1.1 The machine size and weight measurements, given the technical specification sheet.The ground, where the
machine will be placed, should be even, solid enough to bear the weight of the machine
5.1.2 The machine should be located approx. 50 cm away from the rear wall
5.1.3 You can provide the balance of the machine with adjustable counterforts (PICTURE 2 NO 72) in the bottom
part.
5.1.4 Tie the table of machine given as standard accessory on the front surface of the chassis. Apply the definition
below step by step for the assembly of the table.