Analog Input Pt100; Interface Rs485; Analogue Output 1 - IBS BatchControl CTR 210 Installation Instructions Manual

Fitting and Installation
2.5.4. Analogue input Pt100
Each input can be provided with a Pt100 input module as an option.
Pt100-inputs are not voltage-free, i.e. the minus is at instrument ground
potential.
Temperature range:
Error:

2.5.5. Interface RS485

2.5.6. Analogue output 1

The analogue output is not electrically isolated. The minus is at ground
potential.
8
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
Terminal 7
Terminal 8
Terminal 9
-200 °C to +800 °C
< 0,1 % from end value
Terminal 10
Terminal 11
Terminal 12
Terminal 13
Terminal 14
+ measuring input 1
- measuring input 1
+ current output 1
+ measuring input 2
- measuring input 2
+ current output 2
+ measuring input 3
- measuring input 3
+ current output 3
GND
B
A
+ current output 1
- current output 1
Umax = 5,3 V
Imax = 2 mA
Umax = 5,3 V
Imax = 2 mA
Umax = 5,3 V
Imax = 2 mA
Imax = 20 mA
Umax = 24 V
I = 4 - 20 mA