•
PRINT ELEMENT REMOVAL AND REPLACEMENT (3210)
Removal
1.
Press the NOT READY key.
2 Raise the top cover.
3. Note the direction of the arrow on the print element.
4. Lift the print element release lever.
5. Lift the print element off the element post.
Print Element
Release Lever
Pri nt Element - -
iiiiiiii:::-~-:-";;;;::'il;''::.
Print Element Post
-~~;:::;::
Replacement
1. I nstall the print element on the element post with the
arrow pointing in the same direction it was on removal.
2. Lower the release lever to lock the print element in
place.
Printer-Kcybollrd
31