Table of Contents
Advertisement
8
After Use and Storage
After use, clean out the pump by running it for a few minutes with the solvent for the product being sprayed. This will
prevent the formation of chemicals which could interfere with normal operation. When the solvent runs clear, run the pump
with the suction line out of the material to ensure complete drainage of the pump.
For winter storage, drain pump completely. Examine pump rollers and replace if necessary.
MAINTENANCE
CAUTION;
DISCONNECT SPARK PLUG WIRE BEFORE WORKING ON MACHINE.
Engine Service
For the engine read "Honda Owner's Manual". Engine oil should be changed in conformity with "Honda Owner's Manual".
Keep the cylinder head clean so that it can cool the engine properly. Frequent oil changes will significantly prolong life of
engine. SAE 10W30 is recommended by Honda (see Honda Engines Owner's Manual). Unleaded gasoline is also
recommended to increase valve life.
If service or repair of engine is needed, contact an authorized Honda centre. You will need the model, and serial number of
your engine.
Grizzly equipment warranty does not cover the engine, which is covered by a separate warranty from Honda.
©Alcor 2011 All rights reserved
Advertisement
Table of Contents
