Related Manuals for Industriarmatur SIPP Node 400
Summary of Contents for Industriarmatur SIPP Node 400
- Page 1 SIPP Node 400 and 500 Safe Indication of Petroleum Products Installation Instructions English version Industriarmatur Sweden AB Kämpegatan 16 SE-411 04 GÖTEBORG Phone +46 31 80 95 50 info@industriarmatur.se ○ ○ ○ ○ ○ www.industriarmatur.se...
- Page 2 Installation instructions SIPP Node 400 and 500, Version 4, December, 2016 Table of contents Preparations ......................3 Tools ........................3 Consumables ......................3 Installation ......................4 Mounting on rim ....................4 Mounting verticalon rim / splinter ............... 4 SIPP Node 500 – wall mounting................4 Mounting of unit ....................
- Page 3 Installation instructions SIPP Node 400 and 500, Version 4, December, 2016 1 Preparations Check and classify the pit status in the installation protocol. If the pit is in poor • condition, cancel the installation, comment on the installation protocol and notify the customer.
-
Page 4: Installation
• permanently. Mounting the unit SIPP Node 400 - Fasten the unit to the installation pole using a 17mm spanner. Check • that the suction hose has enough room, if not fit the unit higher up on the pole. SIPP Node 500 - Attach the mounting pole into the bracket, use a rubber mallet to •... -
Page 5: Electrical Installation
5 Electrical installation The customer is responsible for carrying out the electrical installation. • SIPP Node 400 is a permanently installed unit to be supplied with 230VAC and protected • with 6A. SIPP Node 500 is a permanently installed unit to be supplied with 230VAC and protected •... - Page 6 Installation instructions SIPP Node 400 and 500, Version 4, December, 2016 The documentation, including installation protocol and photographs, should be filed. Information about the installation should be shared with the customer. The installation protocol should be signed and sent to the customer for approval.