Introduction; Specifications - OWI P Series User Manual

OWI User Manual: Model AMP-CAT Amplified Speaker Series

Introduction

The OWI AMP-CAT is a two source integratable self-powered speaker/amplifier. This amplified speaker can drive up
two (2) additional speakers connected series parallel to have a net impedance of 8 ohms. With an included UL Listed,
Level 5 (Energy Star), 15-volt, 3.5 ampere power supply, the amplifier can output 15 watts, or 7.5 watts per speaker in
a 2-speaker hook-up.
Special features of the OWI Model AMP-CAT include:
TWO (2) audio inputs: Stereo 3.5 Mini Jack Line Input, Cat 5 input for OWI Products only
Input # 1 Stereo 3.5 Mini Jack Line Input - The JACK LINE IN accepts unbalanced input via 3.5 mini jack. The stereo
channels are summed together. This input is muted when the Priority Override is in use.
Input # 2 Cat 5 input - Proprietary Cat 5 input for OWI Products only. Use only with OWI MC4. Future models will
work with the OWI AMPSTVCW volume control.
Power Amplifier Features
The power amplifier outputs 15 watts at 4 ohms and 15VDC power. The class D power amplifier has reduced radiated
electromagnetic interference (EMI) due to a special feature of the power amplifier, operating in a patented spread
spectrum. The power amplifier protects itself from over-temperature, over-current, over-voltage conditions. The power
amplifier will shut itself down during these conditions.
IMPORTANT NOTE! This amplifier is intended for audio use only! Continuous sine wave drive into a load will
cause the amplifier to shut itself down when it heats up.
Mechanical "UL rating is dependent upon use of the BACKCAN and Tile Bridge"
Speaker Diameter
Weight of Amplifier/Speaker Assembly
Height of Amplifier/Speaker Assembly
Backcan "Suitable for use in air handling spaces"
Tile Bridge "Suitable for use in air handling spaces"
ELECTRICAL AMPLIFIER
Input voltage, nominal
Input current, operating (15VDC)
Input volt-amperes, peak (15VDC)
Input voltage, maximum
Frequency Response,
EQ set to flat
Bass
Treble
THD + Noise
S/N
Max Power Output (28V in)
DC Power, Standby
AC Power, Sleep Mode
OWI INC.
SPECIFICATIONS (MODEL AMP-CAT)
6

SPECIFICATIONS

AMP-CAT on Ceiling SPEAKER
5 or 6.5 inches
2.85 - 3.15 pounds
4.5 inches
UL Listed Enclosure
UL Listed Support Truss
SPECIFICATIONS
AMP-CAT
(15 watts) 15 volts DC
1.45 amperes peak
22 volt-amperes
16.5 volts, DC
20Hz to 20 kHz
NA
NA
<1% at 13.5 watts, "A" weighted
>82 dB
25 watts
1.4 watts
1.4 watts
www.owi-inc.com
8-23-2018