Control - Occhio air Mounting Instructions

Strip the cable ends 5–6 mm.
Provide stranded copper wire with
suitable wire connectors.
Cable cross-section: 1 –1.5 mm .
2
5–6 mm
1 –1.5 mm
2
Remove the power supply unit
from the drop ceiling and connect
the »air« module as shown.
Stow the power supply unit and
the » air « module in the drop
ceiling, ensure that there is no
tension on the cables and install
the luminaire.
The installation of the
»air« module is now completed
and can be controlled with the
» air « app or the light switch.
51