Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Quick Start Guide
32x32 Modular Matrix
MOD-32432-DVI • MOD-32432-DVIELR • MOD-32432-DVI1FO
MOD-32432-DPDVI • MOD-32432-DPELR • MOD-32432-DP1FO
The tvONE 32x32 Modular Matrix
Congratulations on your purchase of the 32x32 Modular Matrix. Your complete satisfaction is very important to us.
The tvONE 32x32 Modular Matrix provides an all-in-one professional solution to route up to 32 mixed sources to any 32 outputs supporting resolutions up to 1920 x
1200. The modular design of this large-scale matrix provides the ultimate in fl exibility by allowing the use of any combination of DVI, DisplayPort, ELR, and 1FO output
cards in any of its four output slots. This feature allows the tvONE 32x32 Modular Matrix to function as both a Matrix and as an Extender. The front-panel LCD displays
the current routing status and each mixed source is accessible to any display by using the front-panel push buttons, or via the RS-232 interface, or through IP Control
(built-in Web server and Telnet). Hot-swappable, dual redundant power supplies allow these matrixes to be used for applications in demanding environments where
enhanced reliability, 24/7 ease of servicing, and zero down-time are required.
Advertisement
Table of Contents
Related Manuals for Tvone MOD-32432-DVI
Summary of Contents for Tvone MOD-32432-DVI
- Page 1 1200. The modular design of this large-scale matrix provides the ultimate in fl exibility by allowing the use of any combination of DVI, DisplayPort, ELR, and 1FO output cards in any of its four output slots. This feature allows the tvONE 32x32 Modular Matrix to function as both a Matrix and as an Extender. The front-panel LCD displays the current routing status and each mixed source is accessible to any display by using the front-panel push buttons, or via the RS-232 interface, or through IP Control (built-in Web server and Telnet).
- Page 2 www.tvone.com...
-
Page 3: Start Here
Blue LEDs on each card indicate that the card is properly powered. refer to the User Manual, which can be downloaded from the Support section of the tvONE Web site Consult the User Manual for additional information on the rear-panel layout. -
Page 4: Rear Panel Layout
Quick Start Guide Rear-Panel Layout Power indicator Cover plate Output bays Input bays... -
Page 5: Pre-Confi Gured Options
Four input cards. Each card contains eight DVI inputs, providing a total of 32 DVI inputs. • MOD-32432-DVI Four output cards. Each card contains eight ELR-POL outputs. Each of these ELR-POL outputs are connected to a Receiver unit, using a CAT-5e cable, Four input cards. - Page 6 Quick Start Guide Pre-confi gured Options (continued) • MOD-32432-DPDVI • MOD-32432-DPELR Four input cards. Each card contains eight DisplayPort inputs, providing a Four input cards. Each card contains eight DisplayPort inputs, providing a total of 32 DisplayPort inputs. total of 32 DisplayPort inputs. Four output cards.
- Page 7 (32) 5V Power Supplies for the above (32) 5V Power Supplies for the above (1) Quick-Start Guide (1) Quick-Start Guide If any of the items from these pre-confi gured packages are missing, call tvONE Technical Support. Refer to page 1 of this guide for contact information.
- Page 8 Quick Start Guide Connections MOD-32432-DVI Connect up to 32 DVI sources to the DVI inputs. Connect up to 32 displays to the DVI outputs using DVI cables. Connect both AC power cords from the matrix to available electrical outlets. Connecting both AC power cords will provide power redundancy should one of the power supplies fail.
- Page 9 Quick Start Guide MOD-32432-DVIELR Connect up to 32 DVI sources the DVI inputs. Connect a CAT-5e cable (or better), up to 330 feet (100 meters) from each ELR-POL jack on the Sender card to each of the included ELR-POL Receiver units, as shown below.
- Page 10 Quick Start Guide MOD-32432-DVIELR (continued) MOD-32432-DVI1FO Connect a DVI cable from the DVI Out port on the ELR-POL Receiver unit to Connect the up to 32 DVI sources to the DVI inputs on the matrix a DVI display. using DVI cables. DVI-ELRPOL-R Connect a single strand of SC-terminated 50μ...
- Page 11 Quick Start Guide MOD-32432-DVI1FO (continued) 50μ OM3e, OM3, and 62.5μ OM1 multimode fi ber optic cable can be used. Connect both AC power cords from the matrix to available electrical outlets. However, the maximum extension distance is dependent upon the type of Connecting both AC power cords will provide power redundancy should fi ber optic cable used: one of the power supplies fail.
- Page 12 Quick Start Guide DisplayPort Package Options Each DisplayPort package is based on the DVI package options, except for the • MOD-32432-DP1FO fact that all inputs will be DisplayPort instead of DVI. Refer to the connection Connect up to 32 DisplayPort sources to the DisplayPort inputs on the instructions for the DVI version of each package if needed.
-
Page 13: Removing And Installing Cards
Quick Start Guide Removing and Installing Cards Removing Cards Loosen the fastening screws on both sides of the card (or cover plate) to be removed. Each card / cover plate has two fastening screws. WARNING: Cards are sensitive to Electrostatic Discharge (ESD) which can damage the card. -
Page 14: Installing Cards
Quick Start Guide Installing Cards Locate the metal track on either side of the expansion bay. Position either hand on both sides of the matrix and fi rmly push the card with both thumbs until it snaps in place. Carefully position the card between the upper and lower rail on each track and slowly push the card forward. - Page 15 www.tvone.com...
- Page 16 32x32 ModularMX is a trademark of tvONE tvONE reserves the right to make changes in the hardware, packaging, and any accompanying documentation without prior written notice. © 2014 tvONE. All rights reserved. All trademarks are the property of their respective owners.
Need help?
Do you have a question about the MOD-32432-DVI and is the answer not in the manual?
Questions and answers