Panasonic AW-RP60G Operating Instructions Manual page 28

Network settings of the unit
Setting the default gateway
1.
Press the [MENU] button.
2.
Select the [RP IP SET] SYSTEM menu.
3.
Operate the menu operation dials to select the
[GATEWAY] item and then press to confirm.
AW-UE70
RP IP SET
GATEWAY
192 168
PORT PORT
C1 C2
61000 61002
PORT
C5
61008
z This is set to [192.168.0.1] by default.
4.
Use the menu operation dials to set the default gateway
of the unit.
Enter this in 4 blocks of numerals.
If you did not execute [UPLOAD] at the first line of first screen (1/3),
the content you have changed cannot be set.
Note
z In order for the setting to take effect, the unit must be
z
restarted. Turn off the unit's power, and then turn it back on.
Settable addresses
IP
192 168
Block 1
Block 2
Block 3
Block 4
z For the IP address, you can set values within the following ranges.
z
Block 1: 1 to 223
Block 3: 0 to 255
However, [127.0.0.1] cannot be set even though it is within the above
ranges.
z For the subnet mask, you can set values within the following ranges.
z
Block 1: 0 to 255
Block 3: 0 to 255
However, [0.0.0.0] and [127.0.0.1] cannot be set even though they are
within the above ranges.
(continued)
2/3
0 1
PORT PORT
C3 C4
61004 61006
0 xxx
Block 2: 0 to 255
Block 4: 1 to 254
Block 2: 0 to 255
Block 4: 0 to 255
Displaying the MAC address
1.
Press the [MENU] button.
2.
Select the [RP IP SET] SYSTEM menu.
3.
Operate the menu operation dials to select the [MAC
ADDRESS] item and then press to confirm.
AW-UE70
RP IP SET
**-**-**-**-**-**
z The MAC address can only be displayed. It cannot be changed.
28
MAC ADDRESS
3/3