Before First Use - Zanussi ZDV 14001FA User Manual

How to activate the acoustic signals
1. Refer to 'How to deactivate the acoustic
signals', step (1) through (3).
2. Press function button (C),
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C) con-
tinues to flash.

Before first use

1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener man-
ually and electronically.
www.zanussi.com
Water hardness
French mmol/l
degrees
(°fH)
91 - 125 9.1 - 12.5
76 - 90 7.6 - 9.0
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
• The end indicator is off.
3. Press function button (C). The end indicator
comes on, the acoustic signals are active.
4. Deactivate the appliance to confirm the set-
ting.
4. Open the water tap.
5. Processing residues can stay in the appli-
ance. Start a programme to remove them.
Do not use detergent and do not load the
baskets.
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Water softener
adjustment
Manual Elec-
tronic
1) 10
2
1) 9
2
1) 8
2
1)
7
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1
19