Table of Contents
Advertisement
SeeSnake
NOTE! Never fill the drum with water with the reel
on its back (open side of drum facing up)!
Water entering the hub could damage the slip
rings inside (Figure 29).
Figure 29 – Never Fill the Drum with the Reel On Its Back
Monitor Pack
Wipe the Monitor Pack with a damp cloth. Clean the
monitor screen with a small amount of window cleaner
sprayed on a soft, lint-free cloth. Monitor wipes, available
at most computer and office-supply stores, not only
clean the screen, but also help prevent dust build-up.
Always avoid dropping or shocking the Monitor Pack. The
abrasion resistant acrylic shield can be cleaned with
household glass cleaner and a soft damp cloth.
NOTE! Although the acrylic window resists scratching,
care should be taken to brush off excess abra-
sive particles prior to cleaning.
Locating Faulty Components
For troubleshooting suggestions, please refer to Chart 1
at the end of the manual. If necessary, contact RIDGE
Tool Technical Service at 800-519-3456.
14
®
Compact and Color Compact
Ridge Tool Company
Service and Repair
CAUTION
Tool should be taken to a RIDGID Independent Authorized
Service Center or returned to the factory. All repairs
made by Ridge service facilities are warranted against de-
fects in material and workmanship.
If you have any questions regarding the service or repair
of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: TechServices@ridgid.com
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool
Company at (800) 519-3456 or http://www.ridgid.com or
www.seesnake.com
Advertisement
Table of Contents
