LEAD dynamic PDW Series Operating Manual page 7

ENGLISH
2
Installation
white: cool white
yellow: warm white
brown: +
+
learn brown: +
red: red colour channel
green: green colour channel
blue: blue colour channel
A B
A
B
3
Control
To control a product from the LED DYNAMIC SERIES
from LEAD DYNAMIC, you need either a Smart-
phone (not included) and the LEAD DYNAMIC app
or an optionally available product for controlling
(please note the overview at the end of the section).
You can download the LEAD DYNAMIC app free from
the Apple App Store or the Google Play Store. An
up-to-date list of supported operating systems is
available at: www.lead-energy.com.
4
Reset settings
To reset all settings on your LED PANEL DYNAMIC, hold down the 'Reset' button on your WIFI controller until your
luminaire flashes (approx. 10 seconds).
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
}
WiFi
„learning" 15 sec.
Button
Smartphone
Remote Control
Wall Controller
Subject to errors and amendments
white: cool white
yellow: warm white
brown: +
brown: +
red: red colour channel
green: green colour channel
blue: blue colour channel
To start the 'LEARN' function, connect your LED
PANEL DYNAMIC to the mains, press the 'Learning'
button on your WiFi controller and follow the instal-
lation instructions in the operating manual for your
remote control / wall controller or the instructions in
the app. The 'learning' process must be completed
<90 sec.
within 15 seconds. If you want to control the luminaire
using the LED DYNAMIC APP, you have 90 seconds to
complete the 'learning' process.
Otherwise, you will need one of the following
products:
DYNAMIC COLOR:
A
Remote Control CDC / Product No.: 70100006
DYNAMIC WHITE:
Remote Control CDW / Product No.:70100007
DYNAMIC COLOR:
B
Wall Controller WCC / Product No.: 70100015
DYNAMIC WHITE:
Wall Controller WCW / Product No.: 70100016
Information / Technical support: www.lead-energy.com