Installation And First Use - Pro-Ject Audio Systems Stream Box S2 Instructions For Use Manual

Table of Contents

Frontpanel

To switch on from standby or to standby

The push button on the front panel of the unit alternately turns the power on or returns it to standby mode. The

blue LED above the stand-by push button shows that the unit is switched on.

Local

The frontpanel button Local activates Line in input, the blue LED lights up when the local input is activated.

The network player must be switched back to a network source from within the mobile App.

Installation and first use

The unit can be connected to the network/internet via a wired or a wireless connection.

Wired connection: Connect the LAN cable from your network to the Ethernet socket on the backpanel.

Wireless connection (WiFi):

Make sure that antenna is mounted to its connector on the backpanel.

There are more options of how to connect the streamer to a wireless network.

Table of Contents

Do you have a question about the Stream Box S2 and is the answer not in the manual?