Safety Instructions; Mains Power Connection; Local Inputs - Pro-Ject Audio Systems Stream Box S2 Instructions For Use Manual

Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems streamer.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times. Never handle the device or the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the preamplifier is disconnected from the power supply
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.

Mains power connection

Connect the low voltage plug from the power supply to the micro-USB socket Power 5V DC before connecting
the power supply to the mains.
Output
The unit is equipped with 3 outputs: 2x analogue and 1x digital.
1. fixed level analogue output RCA socket
2. variable jack 3.5mm output
3. digital optical output

Local Inputs

The unit offers 2 inputs:
1. USB input for USB flash disk and drives located on the front panel
2. Line input (jack 3.5mm) on the rear panel
2
© Pro-Ject Audio Systems · Pro-Ject Stream Box S2 · Revision 2018.11.29