Care And Maintenance Charts - forest river Coachmen Clipper Owner's Manual

Care And Maintenance

Care and Maintenance Charts

Before Each Trip
Item
Tires and Wheels
Tent Material
Appliances
Weight and
Distribution
Monthly
Item
Fiberglass Exterior
Seals and Adhesives
Appliances
Safety Equipment
Wood Surfaces
Every 3 Months
Item
Doors
Brakes
Every 6 Months
Item
Fiberglass Exterior
Roof
Water and Drainage
Lifter System
Procedure
Check lugnuts are tightened
to specified torque value.
Check tire inflation pressure.
Clean and rinse thoroughly
and allow to dry.
Remove food and ice from
refrigerator after each trip.
Keep RV within specified load
limits and proper weight distri-
bution.
Procedure
Wash with warm water and
mild detergent.
Inspect and reseal as neces-
sary.
Check for obstructions and
dirt on exterior appliance
vents.
Check fire extinguisher pres-
sure and conditions.
Clean pre-finished panels and
wood.
Procedure
Lubricate door hinges and
step components with WD40.
Check operation and for
uneven wear.
Procedure
Wax with liquid or paste wax.
Check condition of body
moldings and reseal as
needed.
Inspect and reseal as neces-
sary.
Check hoses, fittings and con-
nections for leaks or signs of
wear.
Lubricate.
Item
Axles
Wheel Bearings
Yearly
Item
Roof
Doors
Water and Drainage
As Required
Item
Tent Material
Windows
Propane System
Water and Drainage
Electrical
Bunks
Wheel Bearings
Brakes
44
Procedure
Mounting bolts should be
torqued to specific foot
pounds.
Repack wheel bearings.
Procedure
Lubricate roof vent mecha-
nism with light oil.
Lubricate door locks and
strike pocket, including exte-
rior storage and access
doors.
Winterize system, if needed,
due to weather conditions.
Procedure
Remove stains from vinyl with
Oxy-Clean.
Seal leaks in tent vinyl as
required.
Clean windows with plastic
polish used for auto convert-
ible top windows.
Check for leaks and road
damage.
Sanitize system and check
fresh water inlet line screen.
Perform maintenance on con-
verter per converter manual.
Check and service battery (if
so equipped).
Lubricate bunk slides with sili-
cone.
Repack wheel bearings.
Check operation and for
uneven wear.