Related Manuals for AXIOMTEK AX92321-4U
Summary of Contents for AXIOMTEK AX92321-4U
- Page 1 AX92321-4U/8U 4-port/8-port USB3.0 PCI Express Card with 4 independent host controllers User’s Manual...
- Page 2 Disclaimers This manual has been carefully checked and believed to contain accurate information. Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or rights of any third party, or any liability arising from such use. Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document.
-
Page 3: Esd Precautions
When handling boards and components, wear a grounding wrist strap available from most electronic component stores. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. -
Page 4: Table Of Contents
Table of Contents Disclaimers ..................... ii ESD Precautions ................... iii Section 1 Introduction ..........1 General Description ................1 Features ....................1 Specifications ..................2 Dimensions ..................3 Section 2 Connectors & Jumper ......5 Connectors ..................5 2.1.1 12/24V Power Input (ATX1) ................ 5 2.1.2 4P Molex Male connector (ATX2) ............... -
Page 5: Introduction
1500mA current output to supply stable power for various external USB devices. The AX92321-4U/8U also support power on/off control for each port via software settings. This USB 3.0 PCI Express card is able to operate under a wide operating temperature range of 0°C to 70°C, allowing it to be used in harsh environments for vision and factory automation... -
Page 6: Specifications
AX92321-4U/8U 4/8 port USB 3.0 PCI Express Card Specifications Channels 4/8 x USB 3.0 type A connector Controller 4 x Renesas μPD720202 host controllers; compliant with USB 3.0 specification and Intel® xHCI specification, revision 1.0 ... -
Page 7: Dimensions
AX92321-4U/8U 4/8 port USB 3.0 PCI Express Card Dimensions AX92321-4U Component Side AX92321-4U Solder Side Introduction... - Page 8 AX92321-4U/8U 4/8 port USB 3.0 PCI Express Card AX92321-8U Component Side AX92321-8U Solder Side Introduction...
-
Page 9: Connectors & Jumper
AX92321-4U/8U 4/8 port USB 3.0 PCI Express Card Section 2 Connectors & Jumper Connectors Connectors connect the board with other parts of the system. Loose or improper connection might cause malfunctions. Make sure all connectors are properly and firmly connected. -
Page 10: Molex Male Connector (Atx2)
AX92321-4U/8U 4/8 port USB 3.0 PCI Express Card 2.1.2 4P Molex Male connector (ATX2) Description Jumper setting for current limit The following table lists each jumper on the AX92321. Jumper Label JP1~JP8 2.2.1 JP9~JP11 2.2.2 2.2.1 Output current USB port setting (JP1~JP8) If a device over current setting, a USB port will stop providing current. - Page 11 AX92321-4U/8U 4/8 port USB 3.0 PCI Express Card JP10 JP11 Board ID Example: When JP9, JP10 both set to 0 and JP11 set to 1, the board ID is 1 Please also refer to the configuration as the picture below illustrates.
- Page 12 AX92321-4U/8U 4/8 port USB 3.0 PCI Express Card This page is intentionally left blank. Connectors...
-
Page 13: Chapter 3 Software
1. Board ID List This section will show available devices in your system. 2. Port Status Check/Uncheck to control port status. (Checked as ON) Note: AX92321-4U: Port1, Port3, Port5 and Port7 are not valid. Software...
Need help?
Do you have a question about the AX92321-4U and is the answer not in the manual?
Questions and answers