Mechanical Description
Figure 26. c18c Side View
5.2
ASSEMBLY PRECAUTIONS
The following precautions should be observed when handling c18 modules, assembling them onto the host design, or attaching/
detaching the RF cable:
• Handle with care in order to avoid scratches and bending of shields.
• Use a split washer to prevent screws from loosening while vibrating.
• Limit the washer outside dimensions to the restricted area in order to avoid a short-circuit in the board.
Following the guidelines below to avoid detaching connectors from the board:
• Connect/disconnect the socket perpendicular to the RF connector.
• Avoid pulling the opposite connector/cable using excessive force.
• Support the top of the connector with a chassis or housing.
50
98-08901C63-A