Table of Contents
Advertisement
Introduction
Operating voltage:
Current consumption:
TX output power:
RX sensitivity:
Origination rate*:
Termination rate*:
Dropped call rate*:
System acquisition time*:
External display characteristics:
External keypad support
SAR rating:
Connectors:
Serial:
R-UIM:
6
Table 2. Product Specifications (Continued)
Performance
3.6 to 4.5 V DC
CDMA:
• Talk (TX/RX): 740 mA Max
• Receive: 110 mA Max
• Standby (IS-95): < 5 mA for SCI2; TBR = 30 minutes
• Standby (CDMA 1X): < 3.7 mA for SCI2; TBR = 30 minutes
AMPS:
• Talk (TX/RX): 940 mA Max
• Standby Mode: 55 mA Max
µA
OFF Current: < 5
Legend:
• SCI: Slotted Cycle Index
• SCI2: Paging slots every 5.12 seconds
• TBR: Timer Base Registration
• Digital: +24 dBm @ RF port
• Analog: +27.5 dBm @ RF port
• Digital: < -104 dBm for 0.5% BER
• Analog: < -116 dBm for 12 dB SINAD
Within 2% of benchmark unit
Within 2% of benchmark unit
Within 2% of benchmark unit
Best in Class for given network and route
Mechanical
• Serial display supported for Developer's Kit only
• 96 x 64 pixels
• EL backlighting
• Monochrome display
c18 has a SAR mobile exclusion statement
Interfaces
• 70-pin, 0.5mm pitch (same as for g20)
• 36-pin ZIF (same as for g18)
• 28-pin DIN (same as for g18)
• One RF MMCX jack (female) 50 Ohm supporting aGPS, 800, 1900
bands
• One RF MMCX jack (female) 50 Ohm for aGPS active antenna
(optional)
• RS232
• USB
Internal and external R-UIM hardware support
98-08901C63-A
Advertisement
Table of Contents
