Insert A Memory Card; Insert Battery; Remove The Battery; Charging The Battery - Blaupunkt FL 04 Quick User Manual

Table of Contents

4.2. Insert a memory card

The memory card is not part of the basic package, but the memory

of the device can be expanded with an SD card. Please make sure

that the memory card is inserted correctly before use.

Note that the device may shake, the memory card may slide out

of the slot, so please do not bend it, scratch the memory card or

expose it to static electricity or dust, do not immerse it in water.

Place the memory card in the slot on the back of the machine,

with a chip down, as shown on the device.

Please be careful when using a memory card, especially when it is

removed. Some memory cards must be formatted with a

computer before use.

1. Insert the battery chip into the protruding metal point in the

battery slot, insert the battery, and push the top down until the

battery engages in the recess.

2. Put back the back cover.

To remove the battery, turn off the device, remove the cover, and

then remove the battery at the top.

Note:

Please remove the battery when it is switched off, as it may cause

abnormal operation when the skin is switched on.

Connect the charger to the appliance and plug the other end into

the socket. If the device is turned on while charging, the battery

icon will move in the right corner of the display. Charging is

completed when the charging indicator on the top right is lit. If

charging is switched off, a charging indicator appears on the

display. When charging is complete, unplug the charger from the

unit.

Table of Contents