Page 1
• 1 GoBidet™ Unit w/ mounting bracket, nut, rubber washer, and plastic washer • 1 Plastic Spacer (part no. 2003.11) • 1 3/8” Hose (part no. 2003.14) • 1 7/8” T-valve (part no. 2003.18) - installs on bottom of toilet tank • Tape...
Page 2
For hot water installation, please use the Hot Water Installation Kit (Part no. 2003HIK ), available by calling 1-800-681-0753. Your GoBidet™ will attach to a one-piece toilet (tank/bowl are molded into one or elongated toilets. See “Parts Breakdown”page for instructions on changing the bushing bracket mounting location.
Page 3
C. Hose Installation Install the 7/8” T (Part no 2003.18) to the bottom of the toilet. Connect the 3/8” hose to the 3/8” nipple and then connect to the bidet. Connect the other end of the hose to the already installed 7/8” T valve.
Page 4
5. Shower head assembly (Part no.2003.01) will not move when sitting on the toilet: • If you used all of the included spacers (Part no 2003.11 ) on the side of seat without the GoBidet (Step “D.2”) you can request more by contacting us at 1-800-681-0753.
Need help?
Do you have a question about the 2003 and is the answer not in the manual?
Questions and answers