Demo; Led - Waveshare Open429I-C (HAL) User Manual

Open429I-C User Manual

2. DEMO

KEIL MDK Version：5.12or above.
⚫
Programmer/Debugger: ST-LINK V2
⚫
Programming/Debugging interface: JTAG/SWD
⚫
Results of demo which based on serial port are all checked via onboard PL2303;
⚫
connect the USB cable to the USB TO UART interface.
PC's serial port settings:
⚫
Baud rate
Data bits
Stop bits
Parity bits
Flow control
Note: All the below Demo results are available when push the reset button after the
program has been downloaded.
2.1.

LED

Overview
⚫
IO output demo
Hardware connection
⚫
Fit all the jumpers LED JMP
Operation and result
⚫
The LED blinking
Version: V1.3.3, Date: 2019.04.02
115200
8
1
None
None
8 / 47