Gigabyte X299X AORUS XTREME WF User Manual page 70

Step 4:
Under Select Disks item, select the hard drives to be included in the RAID array. Press the <Space> key on
the hard drives to be selected (selected hard drives are marked with "X"). Then set the stripe block size (Figure
5). The stripe block size can be set from 4 KB to 128 KB. Once you have selected the stripe block size, set
the volume capacity.
Step 5:
After setting the capacity, move to Create Volume and press <Enter> to begin. (Figure 6)
Configuring a RAID Set
Figure 5
Figure 6
- 70 -