Chapter 6 Appendix; Configuring Audio Input And Output; Configuring 2/4/5.1/7.1-Channel Audio - Gigabyte X299X AORUS XTREME WF User Manual

Chapter 6 Appendix
6-1 Configuring Audio Input and Output
After you install the included motherboard drivers, make sure your Internet connection works properly. the system
will automatically install the audio driver from Microsoft Store. Restart the system after the audio driver is installed.
6-1-1 Configuring 2/4/5.1/7.1-Channel Audio
The motherboard provides five audio jacks on the back
panel which support 2/4/5.1/7.1-channel
The picture to the right shows the default audio jack
assignments.
To configure 4/5.1/7.1-channel audio, you have to retask either the Line in or Mic in jack to be Side
speaker out through the audio driver.
A. Configuring Speakers
Step 1:
Go to the Start menu click the Realtek Audio Console.
Step 2:
Connect an audio device to an audio jack. The Which
device did you plut in ? dialog box appears. Select
the device according to the type of device you connect.
Then click OK.
(Note) 2/4/5.1/7.1-Channel Audio Configurations:
Refer to the following for multi-channel speaker configurations.
• 2-channel audio: Headphone or Line out.
• 4-channel audio: Front speaker out and Rear speaker out.
• 5.1-channel audio: Front speaker out, Rear speaker out, and Center/Subwoofer speaker out.
• 7.1-channel audio: Front speaker out, Rear speaker out, Center/Subwoofer speaker out, and Side speaker out.
audio.
(Note)
Center/Subwoofer
Speaker Out
Rear Speaker Out
- 117 -
Line In
Front Speaker Out
Mic In
Appendix