Section 06 of this user manual to ensure the product is safe to use. James Leckey Design Ltd. cannot accept any responsibility if the product is used outside of its intended use. If in doubt please...
Bench has been CE marked as a Class 1 medical device. SECTION 03: TERMS OF WARRANTY The warranty for Leckey Therapy Bench applies only when the product is used according to its intended use, following all manufacturer’s specifications. A one year warranty is provided with this James Leckey Design Ltd.
– including sources of heat including naked toggles and straps. flames, cigarettes, electric and gas heaters. 6. Do not modify Leckey Therapy Bench or use components other than 12. Do not place hot objects greater Lecky approved components with than 40°C.
Leckey Therapy Bench Manual SECTION 05: CLEANING & CARE How to Maintain: Height Adjustable Legs and Height adjustable Footrest: • When cleaning Leckey Therapy Bench we recommend that you 1. Ensure the bottom of the use only warm water and a Leckey Therapy Bench base unit non-abrasive detergent.
Therapy Back Support are fixed correctly at the desired heights/ depths and ensure the Leckey Therapy Bench is stable and secure before placing the user on. 3. Ensure the Activity cradle is securely fixed to the Leckey Therapy Bench before placing the user in.
Please exercise caution and monitor the user closely whilst alterations are being made to the Activity cradle. Lifting a user on and off of the Leckey Therapy Bench is an activity which could cause injury to your back. We would recommend you seek...
Measure the hip for to the correct size before use. Activity Cradle, Asis to Asis Hip circumference. • Make sure the Leckey Therapy Bench and Activity cradle are clean, dry and free from anything that may cause ham to the user before use.
Page 10
Ensure that the seat base and for storage. has slotted into the desired position resulting in the bench being level at • To adjust the Leckey Therapy Bench all four points before re-tightening seat base height, simply loosen all four knurled knobs securing the the four knurled knobs on the inner seat base in place.
Page 11
Leckey Therapy Bench Manual p11 09.4 Adjusting the seat base height and angle The seat base can be angled both • To angle the bench posteriorly/ laterally and anteriorly/posteriorly anteriorly, tighten the two knurled accommodating any deformities knobs nearest the back of the bench (e.g.
Page 12
• The footplate can be completely • To adjust the Leckey Therapy Bench removed if needed. footplate height, simply loosen the four knurled knobs on the outer...
Page 13
09.6 Attaching the back support The back support can be attached • To attach the back support, insert to the Leckey Therapy Bench to aid two knurled knobs through the therapists with controlling the bottom arm of the back support...
Page 14
Leckey Therapy Bench Manual 09.7 Attaching user in activity cradle and the activity cradle to the seat base There are 4 straps which secure the activity cradle to the bench. Two straps have no buckle and come from the side and attach to the back.
Page 15
Leckey Therapy Bench Manual p15 3. Place the child back into the cradle with their bottom over the white stitched line. 4. Fasten the front velcro pad and the front strap around the child’s tummy.
Page 16
Leckey Therapy Bench Manual 5. Thread the padded central strap 6. Fold over the added central strap between the front buckle and so that the buckle is now hidden. the child and tighten the buckle This material will protect the child securely.
Page 17
Leckey Therapy Bench Manual p17 8. Take hold of the two large buckle straps The harness should be which come from the rear of the corset. tight and hold pelvis Pull them over the child’s inner thigh in neutral. and secure to the buckles at the front of the bench.
Leckey Therapy Bench Manual SECTION 10: SIZING INFORMATION Technical Details Max User Weight 80kg 1-14 Bench Footprint 620mm x 740mm Seat Base Height (from ground) Min 330mm Max 460mm Seat Base Width 620mm Seat Base Depth 360mm Footplate Height (from ground)