BMW M2 Owner's Manual page 169

Overview
Depending on the vehicle
equipment: button in the vehicle
Park assistance button
Camera
The camera lens is located in the handle of the
trunk lid.
The image quality may be impaired by dirt. If
necessary, clean the camera lens.
Switching on/off
Switching on automatically
The system is switched on automatically if selec‐
tor lever position R is engaged when the engine
is running.
The rearview camera image is displayed if the
system was switched on via iDrive.
Online Edition for Part no. 01402720665 - II/19
Driving comfort
Automatic deactivation during
forward travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Depending on the vehicle
equipment: switching on/off
manually
Press the park assistance button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The parking assistance functions are shown on
the Control Display.
Switching the view via iDrive
If the rearview camera view is not displayed,
change the view via iDrive:
1. Move the Controller to the left, if needed.
2. "Rear view camera"
The rearview camera image is displayed.
Display on the Control Display
Functional requirement
▷ The rearview camera is switched on.
▷ The trunk lid is fully closed.
▷ Keep the recording range of the camera
clear. Protruding cargo can lead to malfunc‐
tions.
Activating assistance functions
More than one assistance function can be active
at the same time.
Move the Controller to the left, if needed.
▷ Parking aid lines
"Parking aid lines"
Lanes and turning radius lines are indicated.
▷ Obstacle marking
CONTROLS
169