BMW M2 Owner's Manual page 131

Distance to destination
Depending on the vehicle equipment, the dis‐
tance remaining to the destination is displayed if
a destination is entered in the navigation system
before the trip is started.
The distance to the destination is adopted auto‐
matically.
Time of arrival
Depending on the vehicle equip‐
ment, the estimated time of arrival
is displayed if a destination is en‐
tered in the navigation system be‐
fore the trip is started.
The time must be correctly set.
Onboard Computer on the
Control Display
Concept
The Onboard Computer displays different vehi‐
cle data on the Control Display, such as average
values.
General information
Two types of Onboard Computers are available
on the Control Display:
▷ "Onboard info": average values, such as the
consumption, are displayed. The values can
be reset individually.
▷ "Trip computer": the values deliver an over‐
view of a specific route and can be reset as
often as necessary.
Calling up the Onboard Computer or
trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info" or "Trip computer"
Online Edition for Part no. 01402720665 - II/19
Displays
Resetting the Onboard Computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Onboard info"
4. "Consumption" or "Speed"
5. "OK"
Resetting the trip computer
Via iDrive:
1. "My Vehicle"
2. "Driving information"
3. "Trip computer"
4. Move the Controller to the left, if needed.
▷ "Reset": all values are reset.
▷ "Automatic reset": all values are reset
approx. 4 hours after the vehicle has
come to a standstill.
5. If necessary, "OK"
Sport displays
General information
Depending on the vehicle equipment, the current
values for performance and torque can be dis‐
played on the Control Display.
Displaying sport displays
Via iDrive:
1. "My Vehicle"
2. "Technology in action"
3. "Sport displays"
CONTROLS
131