Advertisement
Advertisement
Table of Contents
Related Manuals for DX Engineering DXE-SWP8
Summary of Contents for DX Engineering DXE-SWP8
- Page 1 Switch Pad 8 Transceiver External Key Pad DXE-SWP8 DXE-SWP8-INS Revision 0 © DX Engineering 2019 1200 Southeast Ave - Tallmadge, OH 44278 USA Phone: (800) 777-0703 ∙ Tech Support and International: (330) 572-3200 Fax: (330) 572-3279 ∙ E-mail: DXEngineering@DXEngineering.com...
- Page 2 Every effort is made to supply the latest manual revision with each product. Occasionally a manual will be updated between the time your DX Engineering product is shipped and when you receive it. Please check the DX Engineering web site (www.dxengineering.com) for the latest revision manual.
- Page 3 Setting the Internal Jumpers There are two internal jumpers that need to be set for the brand of transceiver you are using. Open the DXE-SWP8 by removing the screws on the case to gain access to the two internal jumpers.
- Page 4 Refer to section 16 in the TS-990S manual (version EN 1.01) for complete details. When you program the buttons on the DXE-SWP8, you may want to make a small chart so you remember what the function buttons are set for.
- Page 5 Icom makes. Always refer to your latest ICOM transceiver manual for complete up-to-date details. When you program the buttons on the DXE-SWP8, you may want to make a small chart so you remember what the function buttons are set for.
- Page 6 Button Message or Radio Function Button Message or Radio Function - 5 -...
- Page 7 Button Message or Radio Function Button Message or Radio Function - 6 -...
-
Page 8: Technical Support
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or any other work, unless such charges are authorized in advance by DX Engineering.
Need help?
Do you have a question about the DXE-SWP8 and is the answer not in the manual?
Questions and answers