Installation; Wall Mount; Pole Mount - SAH ABT-60 Instruction Manual

3

INSTALLATION

Wall Mount:

1. Loosen screw holding
cover and remove the
cover.
5. Connect wires to
the terminals.

Pole Mount:

(Suggested pole diameter Ø38 - Ø48 mm)
1. Pull the wire
2.
through the
wire hole of
the pole.
Pole diameter
Ø38 - Ø48 mm)
2. Attach the mounting
pattern paper to the
wall, mark the installa-
tion holes, and make
the guide holes.
Power Free Tamper
Wiring Distance
Transmitter
Alarm
Diameter of Wire
Power
Tamper
Receiver
Route the wire 3. Route the wire
through the main
through
body of the detec- flange and at-
tor and attach the
tach the flange
detector to the to the pole with
flange.
the pole mount-
ing bracket.
Flange
Pole Mount
Pole Cover
Knock Out
3. Break knock-out
and pull
through.
6.
Model ABT-30
Voltage
12 V 24 V 12 V 24 V 12 V 24 V 12 V 24 V
2
0.30 mm (∅0.6)
280 m 240 m 250 m 210 m 190 m 160 m 190 m 160 m
2
0.50 mm (∅0.8)
500 m 440 m 430 m 360 m 360 m 300 m 360 m 300 m
2
0.75 mm (∅1.0)
780 m 700 m 680 m 610 m 546 m 490 m 546 m 490 m
2
1.25 mm (∅1.2)
1120 m 1000 m 980 m 870 m 784 m 700 m 784 m 700 m
4. Attach
the pole to the
flange.
4. Attach the unit to
wire the wall
Make the optimum optical adjust-
ment as per section 4, and confirm
system operation before replacing
covers.
ABT-60 ABT-80
the
Back-to-back pole mounting.
15%
ABT-100