Table of Contents
Advertisement
lipLEDs
Installation Instructions
Dry Location Hardwiring
Feed wire into junction box and secure with strain relief fitting.
TIP: Leave enough excess wire for feed to junction box to be relaxed.
Junction box
(by others)
Cord grip
(by others)
Dry Location Wiring Diagram
Hot
J box
(by others)
Neutral
Cutting the Power Plug (If Applicable)
Cut power plug near the end and strip jacket, exposing about 1" of wire.
NOTE: Do not remove rectifier from power cord.
™
Rectifier
(Do not remove)
Service loop
Black (Hot)
Rectifier
White (Neutral)
White (Neutral)
White (Neutral)
Black (Hot)
Black (Hot)
CALIFORNIA ACCENT LIGHTING, INC.
2034 E. Lincoln Ave. #431, Anaheim, CA 92806
ph. 800.921.CALI (2254) or 714.535-7900 \ fx. 714.535.7902
info@calilighting.com \ calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Wet Location Hardwiring
Feed wire into weatherproof junction box and secure with weatherproof
strain relief fitting.
TIP: Leave enough excess wire for feed to junction box to be relaxed.
Weatherproof
junction box
(by others)
Weatherproof
cord grip
(by others)
Wet Location Wiring Diagram
Hot
Weatherproof
J box
(by others)
Neutral
LLED8700-OL
Wiring Diagrams
Rectifier
(Do not remove)
Service loop
Black (Hot)
Rectifier
White (Neutral)
6 of 12
Advertisement
Table of Contents
