Table of Contents
Advertisement
lipLEDs
Installation Instructions
Do not cut power cord with rectifier.
Do not bend lightstrip to a diameter of less than the following:
<12"
<12"
Do not connect lightstrip to power source while spooled or coiled
Do not install lightstrip in a zig zag fashion
Do not install wet location in outdoor cove without proper drainage
Do not use a lighter to heat shrink tube
Do not cross extrusions and twist lightstrip to overlap
Rectifier
Rectifier
<8"
™
Rectifier
<8"
<8"
<12"
Rectifier
CALIFORNIA ACCENT LIGHTING, INC.
2034 E. Lincoln Ave. #431, Anaheim, CA 92806
ph. 800.921.CALI (2254) or 714.535-7900 \ fx. 714.535.7902
info@calilighting.com \ calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Do not install lightstrip with damaged seals
or without shrink tube in wet location
Do not apply excessive pressure to surface of lightstrip
Do not overlap lightstrip at any location
<12"
Do not overlap extrusions in any way. Channel must be on flat, flush surface
<12"
<8"
Do not bend lightstrip along a horizontal plane
Rectifier
<8"
Do not cover or penetrate lightstrip with any material
<12"
Do not apply excessive pressure to rectifier
6"
Rectifier
4"
LLED8700-OL
Product Care
Rectifier
<8"
<12"
<12"
<8"
3 of 12
<12"
TRA
<8"
Advertisement
Table of Contents
