Related Manuals for SOLUXTEC PowerSlate Mono Pure Glass Series
Summary of Contents for SOLUXTEC PowerSlate Mono Pure Glass Series
- Page 1 User Manual PowerSlate Mono Serie PURE GLASS® PowerSlate Multi Serie PURE GLASS® SOLUXTEC GmbH Page 1 of 14 version 1.4 - January 2014...
-
Page 2: Table Of Contents
Index of contents 1. Introduction 2. Basic safety instructions 3. Transport and storage 4. Installation options 5. Instructions for mounting 6. Maintenance and cleaning SOLUXTEC GmbH Page 2 of 14 version 1.4 - January 2014... -
Page 3: Introduction
This User Manual refers to the on-roof mounting, on flat-roof bracing and on shore installations with or without tracker. In case of divergence towards this user manual SOLUXTEC GmbH does not incur liability for personal damages or property damages, which arise because of improper utilization, maintenance or incorrect assembly of the photovoltaic module. -
Page 4: Basic Safety Instructions
Do not modify or decompose the solar panel. And do not remove any from the manufacturer attached notices or type plates. Avoid any contact of the PV-element with metal parts. SOLUXTEC GmbH Page 4 of 14 version 1.4 - January 2014... -
Page 5: Transport And Storage
(For modules in this application class according to EN IEC 61730-1 and -2 are qualified, it is assumed that they meet the requirements of protection class II) SOLUXTEC GmbH Page 5 of 14 version 1.4 - January 2014... -
Page 6: Installation Options
The solar modules can be installed vertically and horizontally. For installation you have to use a suitable mounting rack. SOLUXTEC approves the application of the mounting rack and the clamp from Schletter GmbH. The mounting system belongs to the Laminate Profi Serie, the exactly type delignification of the rails are ,,Module Bearing Profile Solo 05‘‘... - Page 7 It is recommended to keep the torque at 15-20 N.m when tightening (only stainless steel M8 bolts can be used). Stainless steel M8 nut Aluminum splint EPDM rubber gasket Stainless steel T head M8 bolt SOLUXTEC GmbH Page 7 of 14 version 1.4 - January 2014...
- Page 9 The reverse current load capacity of the panel is 12A. Accordingly the string-box has to be equipped with string fuses with a maximum of 12A. Transformerless inverters are generally adapted. SOLUXTEC GmbH Page 9 of 14 version 1.4 - January 2014...
- Page 10 The planning of the wiring of the PV system should consider a tight loop wiring of the plus and minus line. The area enclosed by the conductors should be kept as small as possible. This reduces the risk of inductive coupling caused by lightning strokes. SOLUXTEC GmbH Page 10 of 14 version 1.4 - January 2014...
- Page 11 In every case during development the technical data-sheet of the inverter has to be taken into account. All inverters have to respect the national and local grid-feeding standards including EMC regulations. SOLUXTEC GmbH Page 11 of 14 version 1.4 - January 2014...
- Page 12 If lengthening of string wiring is necessary the polarity has to be respected. The modules have to be mounted in a way which prevents rain water penetrating into the plugs. SOLUXTEC GmbH Page 12 of 14 version 1.4 - January 2014...
-
Page 13: Maintenance And Cleaning
All modules are maintenance free, but it could be useful to verify the PV-installation regularly against following criteria’s: Integrity of the cables Fastening elements against e.g. loose brackets Cleanness, stainlessness and safe connection of all cables connections SOLUXTEC GmbH Page 13 of 14 version 1.4 - January 2014... - Page 14 Administration: Production: SOLUXTEC SA SOLUXTEC GmbH Route de Luxembourg, 74 Werner von Siemens Straße, 25 L-6633 Wasserbillig D-54634 Bitburg Luxembourg Deutschland Phone: +352-267410 Phone: +49 (0) 6561 6937 265 Fax: +352-26741080 Fax: +49 (0) 6561 6937 268 E-mail: E-mail: info@soluxtec.lu info@soluxtec.de...
Need help?
Do you have a question about the PowerSlate Mono Pure Glass Series and is the answer not in the manual?
Questions and answers