Vernier LabQuest Mini User Manual

Download this manual

Enlarged version

Vernier LabQuest

school only. No part of this manual may be used or reproduced in any other manner

without written permission of Vernier Software & Technology, except in the case of

Vernier LabQuest

Mini

brief quotations embodied in critical articles or reviews.

Logger Pro, LabQuest, Vernier, and Vernier and caliper design are our registered

trademarks in the United States. Vernier Software & Technology and Vernier.com

User's Manual

are our trademarks or trade dress.

All other marks not owned by Vernier Software & Technology that appear herein are

the property of their respective owners, who may or may not be affiliated with,

connected to, or sponsored by us.

Need help?

Do you have a question about the LabQuest Mini and is the answer not in the manual?

Page 1 User’s Manual are our trademarks or trade dress. All other marks not owned by Vernier Software & Technology that appear herein are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by us.
Page 2 3. Connect the other end of the cable to a USB port on your computer. Attaching LabQuest Mini to a Computer ........... 7 4. Start Logger Lite, and you are ready to collect data. Note: LabQuest Mini can Starting Logger Lite Software and Preparing to Collect Data ....7 ®...
Page 3 Providing Power to LabQuest Mini Logger Lite Software Power for LabQuest Mini is supplied by the USB port of the computer. It does not The Logger Lite software is contained on the CD provided with LabQuest Mini. require auxiliary AC power or batteries. You simply connect the interface to the To install the software on a Windows computer computer through the USB connection and it is ready to collect data.
Page 4 The LabQuest Mini computer connection is located on the end of the interface. Plug the small end of the USB cable into the LabQuest Mini USB connection. Plug the other end of the USB cable into the USB port on the computer.