Vernier Go Wireless Manual

Vernier Go Wireless
Order Code GW-LINK
The Vernier Go Wireless Link is a single-channel,
wireless interface used to collect data from many Vernier
®
sensors with Bluetooth Smart Ready tablets and other
mobile devices.
What is Included with Go Wireless Link
 Go Wireless Link
 USB Charging Cable
 Quick Start Guide
 Graphical Analysis app (free download from the App Store or Google Play)
Charging Go Wireless Link
Connect Go Wireless Link to the included USB Charging Cable and any USB device
for 2 hours. An LED on Go Wireless Link indicates charging status. A blue light
indicates it is still charging. When the light goes off, it is finished charging.
You can also charge up to eight Go Wireless Link interfaces using our Go Wireless
Charging Station, sold separately (order code: GW-CRG). An LED on each Go
Wireless Link indicates charging status. A blue light indicates it is still charging.
When the light goes off, it is finished charging.
®
Link
Supported Devices
Go Wireless Link can be used with a supported Bluetooth
device* running one of our apps.
 iPad ®
(3rd generation or newer), iPad mini
®
 iPhone
(4S or newer)
 iPod touch ®
(5th generation or newer)
 LabQuest 2 (for support requirements, see www.vernier.com/til/3134/)
 For Android ™
devices, see www.vernier.com/ga-app
Data-Collection Apps
Go Wireless Link can be used with one of the following apps:
 Graphical Analysis for iOS devices (version 2.3 or newer)
Available as a free download on the App Store, use this app for advanced data
collection and analysis. For more information, see www.vernier.com/ga-app
 Graphical Analysis for Android (version 2.2 or newer)
Available as a free download on Google Play, use this app for advanced data
collection and analysis. For more information, see www.vernier.com/ga-app
 LabQuest 2 App (version 2.6 or newer)
For more information, see www.vernier.com/labq2
NOTE: Vernier products are designed for educational use. Our products are not
designed nor are they recommended for any industrial, medical, or commercial
process such as life support, patient diagnosis, control of a manufacturing process, or
industrial testing of any kind.

Specifications

Resolution
Battery
Battery life
Maximum wireless range
How Go Wireless Link Works
Go Wireless Link allows supported Vernier sensors to be wirelessly monitored using
a mobile device*. For a complete list of supported sensors, see
www.vernier.com/gw-link
Go Wireless Link has one button and three LEDs.
Button
 Press the button once to turn on Go Wireless Link. A red LED indicator flashes
when the unit is on.
 Press and hold the button for more than three seconds to put Go Wireless Link
into sleep mode. The red LED indicator stops flashing when sleeping and LED
light is off.
 Press and hold the button for more than eight seconds to reset the system. This
should not be necessary in normal operation.
*
For a full list of supported mobile devices, see www.vernier.com/ga-app
®
Smart Ready mobile
™ ®
, and iPad Air
12 bit
250 mA Lithium Ion battery
Varies depending on sensor used
30 m (unobstructed)
2